Sump pump
A sump is an area or space where liquids are allowed or encouraged to accumulate. Sump pumping is the process of evacuating that liquid using pumps.
In ground engineering works – such as foundations, deep basements, trenches, tunnels and other excavations – groundwater is very often present. This must be dealt with so that work on the site is not difficult, dangerous or even impossible. Modern geotechnical techniques allow groundwater to be safely managed by a process of dewatering.
Without suitable control measures, inflows of groundwater can flood excavations or tunnels, and can also lead to instability when the soils or rock around the excavation weaken and collapse – either locally or on a large scale. The objective of dewatering is to lower groundwater levels to below working level in the excavation. Examples of this group of techniques include sump pumping, well points, deep wells and ejector wells.
Sump pumping is one of the simplest dewatering techniques: groundwater seeps into the excavation and is allowed to collect in sumps – which can either be the lowest point of the excavation or may be an area specially created into which water may seep naturally e.g a well or sump. Each sump will typically have one or more robust electric-powered pumps with the capacity to handle the solids that will inevitably be present. The collected liquid is then pumped away for disposal, either with pumps running continuously or activated automatically as the water level rises.
Sump pumping can be a very effective and economic method to modestly reduce the liquid (‘drawdown’) in a sump, especially in favourable ground conditions such as well-graded course soils (e.g sandy/coarse gravels and gravelly sands).
In unfavourable ground conditions, such as in silts, fine sands and other fine-grained soils, sump pumping may lead to instability as it may draw out fine particles from the soil, potentially causing ground movement such as settlement. Furthermore, depending on the soil type, sump pumping may see high levels of sediment in the pumped water which could have an adverse environmental effect at the point of disposal.
Over the past few decades, there have been several high-profile projects around the world that have been seriously delayed by groundwater problems. However, a greater number have successfully dealt with groundwater.
In the south of England, projects such as High Speed 1 (known as the Channel Tunnel Rail Link during its construction in the early 2000s) and Crossrail have routes which successfully passed through multiple water-bearing strata, including crossing beneath the River Thames. Both projects involved successful dewatering and the use of sump pumps.
[edit] Related articles on Designing Buildings
Featured articles and news
Download your free guide.
Four new types of prior approval for solar developments
Online Planning Portal application types from 5 September.
Election fails to spark construction industry revival
Contract awards and planning; post election.
Making diversity and inclusion easy for SMEs
The CIOB tool for companies with limited resources.
Sustainable Futures: Redefining Retrofit for Net Zero Living
BSRIA Briefing 2024, initial speakers announced.
Looking back at the UK's first Passivhaus leisure centre
Reflections on St Sidwell’s Point with CIAT.
A-Level results and electrical apprenticeships
Electrical Skills Index highlights areas with skills shortages.
One of the world's more unusual drive-throughs.
A quick introduction.
Hadrian's Wall Path and the national trails
The trails are heritage assets in their own right.
Articles on timely advice and hydraulic lime.
Building Designers Association of Australia
CIAT and BDAA sign Memorandum of Understanding.
Built Environment Inclusive partners issue statement committed to inclusion.
Building regulation requirements can have unintended consequences.
CIOB announces 2024/25 vice president
Sustainability champion Professor Saul Humphrey.
Accelerating towards a net-zero built environment.